GelMA Lyophilizate
GelMA is a freeze-dried product of porcine gelatin functionalized with methacrylate groups. It is one of the most popular biomaterials in tissue engineering, used in a variety of applications. GelMA is easy to dissolve in our Reconstitution Agent P at your target concentration to prepare your unique bioink. Addition of a photoinitiator is vital to make your bioink photocrosslinkable and thereby stable in cell culture applications.
Applications
- In a low concentration formulation for use with the BIO X EMD Printhead to generate microspheres
- In a high concentration formulation to generate bioinks such as GelMA Bioink or blended with other additives to generate your own unique bioink.
- Compatible with thickeners such as Nanofibrillated Cellulose, Xanthan Gum, and Glucomannan.
- After 3D cell culture you can easily harvest the cells for analysis using the Cell Collect G Bioink Lysis Reagent.
Recommended for use with BIO X, a temperature-controlled printhead and a cooled print bed, or INKREDIBLE+ with a heated printhead. Not recommended for use with INKREDIBLE.
Please contact [email protected] for bulk quantities.
Shipping starts from October 15, 2020
$109.00 – $569.00
Description
Two 500 mg bottles of lyophilized GelMA (sterile).
Minimum 9 months shelf life.
Optional photoinitiator: LAP or Irgacure 2959 (non-sterile)
The kit includes:
- Two 500 mg bottles of lyophilized GelMA (sterile).
- 100 mg LAP photoinitiator (non-sterile).
- 50 mL Reconstitution Agent P (sterile).
- Consumables Kit A5 (Five amber cartridges, five luer lock adaptors, 15 nozzles, all sterile)
For research use only. Not for human use.
Specifications
Appearance |
White to off-white lyophilizate |
Sterility | Sterile |
Viscosity | 168±60 Pa·s |
pH | 7.0-7.4 |
Degree of methacrylation | 45-55% |
Documents
Printability Data
Conical tip (~23.4° C)
This diagram shows the printability and properties of CELLINK GelMA, printed with a 27G conical tip at room temperature (around 23.4° C). The different lines correspond to different printing pressures as indicated by the colors in the legend.

Lines
Representative diameters of CELLINK GelMA printed at 20 kPa and increasing translation rates through a 27 G nozzle, representing filaments of CELLINK GelMA at translation rates of (a) 500, (b) 800, (c) 1100, (d) 1400, (e) 1700, (f) 2000 mm/min.
