Ruthenium

Description

The Ruthenium visible light photocrosslinking kit is ideal for tissue engineering, cell culture, and bioprinting, where tuning the mechanical properties of the substrate is required. The kit provides enough photoinitiator for >200 mL of bioinks/hydrogels (following recommended concentrations).

• Ruthenium is a photoinitiator that utilizes visible light photocrosslinking (400-450nm) to covalently crosslink free tyrosine and acryl groups.
• Ruthenium photoinitiator has been tested on collagen type I, gelatin, silk fibroin, methacrylated hyaluronic acid, methacrylated gelatin, methacrylated collagen type I and PEGDA.
• Ruthenium is water soluble and yields better cell cytocompatibility, and crosslinking efficiency.
• Increasing Visible light intensity from 3-100 mW/cm2 using Ruthenium did not significantly decrease cell viability from 90%.
• Increasing Ruthenium concentration by 10 times (10x) did not decrease cell viability from 90%.
• Ruthenium is red/yellow/orange in color and will change the color of your solutions, hydrogels, or printed constructs.

This Ruthenium photocrosslinking kit is considered non-sterile. Adding antibiotics to your cell culture system, or sterile filtering is recommended. To sterile filter, resuspend the entire volume of Ruthenium and Sodium Persulfate (separately) and filter through small 0.2 micron button filters (separately). Use the sterile photoinitiator within 2 weeks. The Ruthenium visible light photocrosslinking kit is composed of two components, as found in Table 1.

Table 1

Storage/stability

The product ships ambient. Store the kit at room temperature. Weigh out the required amount of  powder to solubilize. Once solubilized, use the Ruthenium and Sodium Persulfate within 2 weeks. Dry powder (non-solubilized) is stable for >1 year at room temperature

Disclaimer

This product is for R&D use only and is not intended for human or other uses. Please consult the Material Safety Data Sheet for information regarding hazards and safe handling practices.